Load the laundry, Measure out the detergent, Measure out the fabric softener – Zanussi ZWF 1011 W User Manual

Page 10: Select the required programme, Select (spin reduction) or (rinse hold) option, Select the required option, Start the programme

Advertising
background image

10

WASHING 2 KG OF MIXED FABRICS AT 50°C

Suppose you have 2 kg of lightly soiled mixed fabrics to
wash. They are rather delicate fabrics and should not be
washed at a high temperature.

1. Load the laundry

Open the door by carefully pulling on the door handle
outwards.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible. Close the door.

2. Measure out the detergent

Pull out the dispenser drawer until it stops.
Measure out the amount of detergent required and pour
it into the main wash compartment

and into the

compartment marked

if you have selected the

prewash” option.

3. Measure out the fabric

softener

If required, pour fabric softener into the compartment
marked

(the amount used must not exceed the

“MAX” mark in the drawer).
Close the drawer gently.

C0071

C0070

P0004

4. Select the required

programme

Turn the programme selector dial to the programme

.

The “Start / Pause” light starts to flash. The pilot lights
corresponding to the various phases making up the
programme come on.

5. Select

(spin reduction) or

(rinse hold) option

Press the option button repeatedly, to select the desired
option. The relevant light illuminates.

6. Select the required option

Select “Prewash” or “Super Rinse” option if required,
the corresponding light illuminates.

7. Start the programme

Before starting up the machine check that:

the appliance is plugged in

the water supply tap is turned on

the drain hose is correctly and securely positioned

the door and the detergent dispenser drawer are
closed.

35.292.995…ZWF 1011 W.qxd 08/09/2005 12:49 Página 10

Advertising