Load the laundry, Measure out the detergent, Measure out the fabric softener – Zanussi ZWF 1220W User Manual

Page 11: Select the required programme, Select the spin speed or option or, Select the required option(s), Start the machine

Advertising
background image

11

WASHING 2 KG OF MIXED FABRICS AT 40°C

Suppose you have 2 kg of lightly soiled mixed fabrics to
wash. They are rather delicate fabrics and should not be
washed at a high temperature.

1. Load the laundry

Open the door by carefully pulling the door handle
outwards.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible. Close the door.

2. Measure out the detergent

Pull out the dispenser drawer until it stops.
Measure out the amount of detergent required and pour
it into the main wash compartment

.

If you wish to carry out the prewash phase, pour the
detergent into the compartment marked

.

3. Measure out the fabric

softener

If required, pour fabric softener into the compartment
marked

(the amount used must not exceed the

“MAX” mark in the drawer).
Close the drawer gently.

C0071

C0070

P0004

4. Select the required

programme

Turn the programme selector dial to the 40 programme.
The START/PAUSE light starts to flash.

5. Select the spin speed or

option or

Turn the selector dial to the required position.
ZWF 1020W

6. Select the required option(s)

Select PREWASH

or QUICK

and/or EASY

IRON if required, the corresponding light illuminates.

7. Start the machine

Before starting up the machine check that:

the appliance is plugged in

the water supply tap is turned on

the drain hose is correctly and securely positioned

the door and the detergent dispenser drawer are
closed.

To start the selected programme, press the
START/PAUSE button; the corresponding light stops
flashing.

Half

Load

Easy

Iron

Options

1000

90

0

70

0

500

60

O

95

40

E4

0

30

60

E

40

40

30

Advertising
This manual is related to the following products: