Zanussi ZWF 1220W - Manual (Page 6)

6
1 Detergent dispenser drawer
Programme Option buttons
Depending on the programme, different functions can
be combined. These must be selected after choosing the
desired programme and before depressing the
START/PAUSE button.
When these buttons are pressed, the corresponding pilot
lights come on. When they are pressed again, the pilot
lights go out.
If an incorrect option is selected, the corresponding
pilot light flashes for about 2 seconds.
2 Options button
By depressing this button you can select two different
options:
● (PREWASH): select this option if you wish
your laundry to be prewashed before the main wash
(not available for wool, handwash and
Miniprogram).
The prewash ends with a short spin in programmes
for cotton and synthetic fabrics, whereas in the
programme for delicate fabrics the water is only
drained.
● (QUICK): a very short cycle for cotton,
synthetic or delicate items that have been used or
worn for a short time.
This opti on cannot be used with the Economy
programme 60E and E40
Max. recommended load 3.5 kg.
The light corresponding to the selected option
illuminates. If an option is chosen that is not allowed
with the selected programme, both lights will flash 3
times.
The Control Panel
ZWF 1020 W
Washing
End
Half
Load
Programme Spin
Easy
Iron
Start/
Pause
Delay
Start
12 H 8 H
4 H
2 H
Options
1 2 3 4 5 6 7 8 9
40°
O
95°
60°
40°
30°
60°
40°
30°
40°
30° /30‘
30°
Wool Cold
Wool
Handwash
Miniprogram
Spin
Drain
Coloured Economy
Synthetics
Whites
Whites Economy
Synthetics
Colour care
Synthetics
Delicates Off
Rinses
AQUACYCLE ESSENTIAL 1000
3 HALF LOAD button
Select this button to reduce water consumption on the
rinse cycle when washing a smaller load of cottons or
linens (maximum load size = 2.5 kg).
The machine will perform 2 rinses instead of 3.
4 EASY IRON button
Selecting this button the laundry is gently washed and
spun to avoid any creasing. In this way ironing is easier.
Furthermore the machine will perform 6 rinses instead
of 3 for cotton and 4 rinses instead of 3 for synthetics.
This function can be used for cotton and synthetic
fabrics.
5 Start Pause button
After having selected the required programme, press
this button to start the machine; the corresponding pilot
light stops flashing.
To interrupt a programme which is running, depress the
Start/Pause button: the corresponding pilot light starts to
flash.
To restart the programme from the point at which it was
interrupted, press the START/PAUSE button again.
6 DELAY START button
This button makes it possible to delay the starting of the
washing programme by 12, 8, 4 and 2 hours. The delay
you have selected is indicated by the illumination of the
corresponding light.
You must select this option after you have set the
programme and before you press the START
PAUSE button.
You can cancel the delay time at any moment, before
you press the START/PAUSE button.