ZyXEL Communications 2304R-P1 - Manual (Page 72)

Prestige 2304 Support Notes
All contents copyright (c) 2005 ZyXEL Communications Corporation.
72
Settings
Speaking
Volume
Use this field to set the loudness that the Prestige uses for the speech signal
that it sends to the peer device. -1 is the quietest and 1 is the loudest.
Listening
Volume
Use this field to set the loudness that the Prestige uses for the speech signal
that it receives from the peer device and sends to your phone. -1 is the
quietest and 1 is the loudest.
Outgoing
Call use
SIP 1 and SIP 2 correspond to the Prestige’s SIP accounts. Select whether
you want the phone(s) attached to this phone port to use SIP account 1, 2 or
both when you make a call. If you select both SIP accounts, the Prestige will
first try to use SIP account 2 and then SIP account 1 when you make a call.
G.168 Active Select this check box to cancel the echo caused by the sound of your voice
reverberating in the telephone receiver while you talk.
VAD
Support
Select this check box to use Voice Activity Detection (VAD) to reduce the
bandwidth that a call uses. The Prestige will generate and send comfort
noise when you are not talking.
Dialing
Interval
When you are dialing a telephone number the Prestige waits this long after
you stop pressing the buttons before initiating the call. Select how many
seconds you want the Prestige to wait after the last input on the telephone’s
keypad before dialing (making) a call.
Apply Click Apply to save your changes back to the Prestige.
Reset Click Reset to begin configuring this screen afresh.
Phone book Speed dial
Prestige allows you to configure up to 10 SIP numbers in the phone book for speed dial.