Xerox 4508 - Manual (Page 108)

S I M M M e m o r y M o d u l e I n s t a l l a t i o n
B-8 ❖ D o c u P r i n t 4 5 0 8 U s e r G u i d e
5 Position the SIMM module with notch on
the top.
A Hold the SIMM module at a vertical
30 degree angle and firmly push it with
your thumbs into the slot. Push the
module into the back of the slot to fully
seat it.
B Rotate the module to the right until the
clips on the edges of the slot snap into
place (you will feel and hear a “click”).
6 Reverse order to reinstall metal cover
and panel cover.
Note
Not every SIMM is compatible with our printer. Consult your
dealer for the correct part number when you want to expand
your memory. Refer to Chapter 15 for ordering information.
4508-apb.frm Page 8 Wednesday, May 22, 1996 8:30 AM