Connecting to the network, Integrated fiery color server on the network, Onnecting – Xerox 700 User Manual
Page 9: Etwork
C
ONNECTING
TO
THE
N
ETWORK
9
C
ONNECTING
TO
THE
N
ETWORK
This chapter summarizes the stages in setting up the Integrated Fiery Color Server.
Integrated Fiery Color Server on the network
When the Integrated Fiery Color Server is connected to a network, it behaves as a networked
printer. The Integrated Fiery Color Server supports the following network protocols (rules
that enable computers on a network to communicate with each other):
• AppleTalk, Bonjour
• TCP/IP, which also includes the BOOTP, DHCP, FTP, HTTP, IMAP, IPP, IPv4, IPv6,
LDAP, LPD, NBT, POP3, Port 9100, SMB, SMTP, SNMP, SNTP, and SSL/TLS
protocols
These protocols can run concurrently on the same cable. Computers that use other protocols
can print through a server that uses one of the supported protocols. The Integrated Fiery
Color Server is auto-sensing, and handles all connections simultaneously.