Xerox 16 Series - Manual (Page 77)

Error Messages 3-7
3
Error Messages
From the FusionPunch II
The following is a listing of Punch-related error messages that could appear
on the FusionPunch II Control Panel Display screen. Also included are a
description of the possible causes and the resolution for each problem.
Error Message Possible Cause Resolution
Punch Covers Open The Interlock Switch
under one or both of
the Punch covers is not
actuated. Open and close both Punch
covers and ensure that they
are securely closed. If the
problem persists, call your
GBC or Xerox Service
Representative.
Punch Left Door open/
Punch Mid Door open/
Punch Right Door
open The Interlock Switch
behind the Punch Door
that corresponds to the
error message is not
actuated. Open and close the
appropriate door,
corresponding to the error
message, and ensure that it is
securely closed. If the
problem persists, call your
GBC or Xerox Service
Representative.
Stacker Cover open The Interlock Switch
under the Stacker’s
Top Cover is not
actuated. Open and close the Stacker’s
Top Cover and ensure that it
is securely closed. If the
problem persists, call your
GBC or Xerox Service
Representative.
Stacker Door open The Interlock Switch
behind the Stacker
Door is not actuated. Open and close the Stacker
Door and ensure that it is
securely closed. If the
problem persists, call your
GBC or Xerox Service
Representative.
Figure 3-4: Punch-Generated Error Messages