Xerox XR6 Series - Manual (Page 17)

OSD Menu
16 Xerox© LCD Monitor User’s Manual
To create the best picture, your XR6 series series has been
preset at the factory with the Preset Mode Timing shown on
page 22.
The OSD (On Screen Display) Menu allows the user to adjust
various settings and options by following the steps below.
1
Press the MENU button to display the OSD. The OSD main
menu provides an overview of the selection of controls
available.
2
Press the ▲ or ▼ button to highlight the desired icon. Then,
press the MENU button to activate the highlighted icon.
3
Press the ▲ or ▼ button to select the desired adjustment
icon. Then, press the MENU button.
4
Press the ▲ or ▼ button to change the value of the selected
item.
5
Select the exit icon to exit the OSD.
6
Repeat steps 1 through 4 to make further adjustments. All
changes are stored immediately.
Using the OSD Menu
3 OSD Menu
picture
advanced
options
utilities
reset
exit
auto adjust <up>to select
brightness
contrast
h position
v position
phase
clock
exit