Yamaha CDC-697 - Manual (Page 23)

English
FUNCTIONS FOR
RECORDING
19
En
Manual Tape Programming
With this function, you can program tracks from one or
more discs in any order to be recorded onto tape.
1 Stop the unit.
2 If you will select tracks from a disc (or discs)
other than the disc on the Disc 1 tray, make this
unit display the total recorded time of each disc
to be used by pressing the DISC SKIP buttons
in turn.
* This unit will read the contents of a disc by this
operation. If there is a disc to which this operation is
omitted, tracks on the disc cannot be programmed.
3 Follow step 3 on page 18.
4 Press the PROG button.
5 If necessary, select a desired disc by pressing
the DISC SKIP buttons.
6 Select a desired track.
DISC SCAN
REPEAT
CDC8 WH26170
RANDOM
DISC SKIP
SYNCHRO DIMMER
STANDBY/ON
PEAK
PROG CLEAR TAPE
3 2 1
6 5 4
9 8 7
INDEX +10 0
OUTPUT LEVEL MODE
DISC SCAN
REPEAT RANDOM
DISC SKIP
+ -
OPEN/
CLOSE
TEXT/
TIME
4
6
8
2,5
1
PROG
2 A - 0 1
H
1DISC
5DISCS
TITLE
REP RNDM SAVE BEST EDIT FILE
S F PROG CD- TEXT
ARTIST TRACK 1 2 3 4
6 7 8 9
11 12 13 14
16 17 18 19
■ Display information during
programming
1 Shows the number of programmed tracks for each side in
turn just after the automatic programming is finished,
and then it is replaced by the number of the first
programmed track for side A.
2 Shows the total time of programmed tracks for each side.
3 Shows the programmed track numbers for each side.
TRACK PROGRAMMING FOR RECORDING
5 2 0 : 0 0
1 2 3 4 5
SEARCH
1DISC
5DISCS
TITLE
REP RNDM SAVE BEST EDIT FILE
S F PROG CD- TEXT
ARTIST TRACK 1 2 3 4 5
6 7 8 9 10
11 12 13 14 15
16 17 18 19 20
1 2
3
3 2 1
6 5 4
9 8 7
——10 0
01_En_04_func_CDC-697_UAB.p65 7/12/06, 13:22 19