Xerox 470 - Manual (Page 303)

Xerox Document Centre Reference Guide Page 15 - 11
15. Pro
b
lem
Solvi
n
g
Output
Quality
(cont’d)
Jobs scan but do not print l Some jobs require image processing before
printing. This may take as long as 2
seconds per page.
l Check the Job Status to determine if a job is
processing. There may be a job in the queue
with a status of paused. Delete this job if it
remains in the state over 3 minutes.
l This may possibly be a result of an
incorrect feature combination. Select
Software Reset.
Machine automatically
deletes the jobs l If accompanied by an out of memory
message, check the Job Queue and delete
unnecessary jobs.
l Ensure that all paper jams have been
cleared and that there is no torn paper
inside a jam area.
l If the machine is scanning and printing the
different jobs, wait until the current printing
job is completed.
l If the machine is scanning and printing the
same job, use Build Job to delay printing.
Scanning complicated half-tones while
printing complicated half-tones requires
more memory than typical copy jobs.
l If using the Document Feeder, check that
originals are flat and not folded.
Output does not reflect the
selections made on the
Touch Screen l Press Clear All between jobs.
Copy
Quality
Output is too light or too
dark l Check the quality of the original.
l Select Lighten or Darken.
l Select text, if the original is text.
Problem Symptom Recommendation