Xerox 470 - Manual (Page 53)

Xerox Document Centre Reference Guide Page 4 - 5
4. M
aki
ng C
o
p
ies
More Stapling Options
Stapling is only allowed in the main tray.
Select 2 Staples to produce output with staples on the side or across
the top depending on the feed direction of the paper.
Select No Staples to produce Collated or Uncollated non-stapled
jobs. Non-stapled jobs can be directed to the Top Output or Main
Output Tray.
NOTE To achieve the best staple location, select the Paper Supply
orientation that matches the format of the original document. If the
appropriate paper is not detected, the system will prompt you to
load the paper. If the job is run without loading the correct paper, a
message will display advising you that the staple is not in the
optimal position.