Zanussi FCS 1020 C - Manual (Page 17)

Programme Energy consumption
(KWh)
Water consumption (litres) Programme duration (Mi-
nutes)
Spin - - ~ 5
1) «Cottons + Eco option» at 60°C with a load of 3 kg is the reference programme for the data entered in the energy label, in compliance
with EEC 92/75 standards.
The consumption data shown on this chart is to be considered purely indicative, as it may vary depending on
the quantity and type of laundry, on the inlet water temperature and on the ambient temperature.
Installation
Lifting the machine
Be careful when lifting the machine. Incorrect methods of
lifting can cause physical injuries and also increase the
risk of damage to the machine. Open the door and take
hold of the top inside of the door opening. You can also
lift the machine by gripping the rear overhang of the top.
Warning! Never lift the machine by gripping it’s
control panel, door, or detergent dispenser.
Unpacking
When supplied the washing machine is packed using a
number of locking devices/packing pieces to prevent
drum and motor from damage in transit All transit bolts
and packing must be removed before using the appliance.
You are advised to keep all transit devices so that they
can be refitted if the machine ever has to be transported
again.
Spread some of the poly-
styrene packaging materi-
als on the floor behind the
machine and then lay the
machine carefully rear
side down on them. Make
sure that no hoses are
crushed in the process.
Remove the polystyrene
base and the plastic sup-
port bar which the ma-
chine rests on.
Return machine to it's upright position and remove the
power supply cable and the draining and inlet hose from
the hose holders on the rear of the appliance.
17