Yamaha 2 EZ-AG - Manual (Page 8)

8 EZ-AG
Names Of the Parts, Controls, and Connectors
■ Body
q VALUE [+]/[-] Buttons
These buttons are used to select sounds and songs as
well as adjust tempo, volume, balance, and other
parameters. Press the [+] button once to increment
the value by one, or press the [-] button once to decre-
ment the value by one. Holding either button causes
continuous incrementing or decrementing in the cor-
responding direction. Press both the [+] and [-] but-
tons simultaneously to reset the initial default value
for the selected parameter.
w Display
Displays the value of the parameter being edited, as
well as the currently selected tempo.
e [VOLUME] Button
This button allows adjustment of both the instru-
ment’s overall volume, and the balance between the
played and accompaniment sound.
Control Section
Frets
EZ-AG frets 1 through 6 are
illuminated and will glow red
when pressed. When the PLAY
MODE is set to CHORD or
BOTH, the appropriate frets
will glow to indicate the frets
you should press.
• When the CAPO function is used an
entire column of frets will glow at the
capo position.
Strings
The strings can be
played either with a pick
or finger style.
Control Section
Connector &
Power Switch Section
Bridge Plate
Strings that are sounding
can be muted by touching
the bridge plate with side or
heel of the right hand. Be
sure to touch the plate on the
back of the neck with your
left hand while touching the
bridge plate with your right
hand (See Page 12.)
LED
PLAY MODE
2 VALUE
TEMPO
CAPO
VOLUME
TUNING
RESET STRUM
START/STOP
CHORD
START/STOP
BOTH
START/STOP
DEMO
START/STOP
SOUND
SELECT
SONG
SELECT
3 1
0.0.0.
q
w
e
r t y u i o
!0
6