Zhone Technologies 08-01002-01 - Manual (Page 9)

vii
Revision 2.01 Elite Modem Installation Guide 08-01002-01
About this document 1-
This document provides instructions for installing, using and troubleshooting
the Elite Modem. Before installing or using the modem, be sure to read the
Safety Considerations and Elite Modem Requirements in this section.
!
Safety Considerations
The Elite Modem complies with the regulatory requirements of CSA C22.2#950-
M95 for Canada and UL 1950 Edition 3 for the United States. Although this
product is designed with your complete safety in mind, there are precautions you
should adhere to for your individual safety as well as the safety of your
equipment. These precautions include, but are not limited to the following:
• Read and understand all instructions.
• Place your modem on a stable surface. Dropping the modem can cause
damage that is not covered under the manufacturer’s warranty.
• Do not disassemble the modem! Opening the unit may expose you to electrical
shock!
• Use caution when installing or modifying telephone lines.
• Do not use modem near water to avoid shock hazard.
• Never install telephone jacks in wet locations unless the jack is specifically
designed for wet locations.
• Never touch uninsulated telephone wires or terminals unless the telephone
line has been disconnected.
• Avoid installing telephone wiring during an electrical storm.
• Do not place objects on top of modem.