Xerox C3000 - Manual (Page 76)

Transmission
66
1
Entering a tone
This function allows a machine connected to a pulse dialing line to send tonal
signals (for example if you want to use a special service on a tone dialing line).
When you press [Tone], the machine dials the number using tonal signals.
This section explains how to use the tone function with On Hook Dial as an ex-
ample.
A
Press [On Hook].
B
Enter the fax number using the number keys.
C
Press [Tone].
D
Enter the number you want to tone dial using the number keys.
E
Press the {Start} key.
The machine starts to scan the original and stores it in memory. When scan-
ning ends, the Communicating indicator lights and transmission starts.
Note
❒ Certain services may be unavailable even when using Tone function.
❒ A tone is shown as a “T” on the display and the next numbers are dialed
using tonal signals.