Yamaha SLG-100S - Manual (Page 11)

11
When putting the Silent Guitar into the supplied soft case, remove the left frame
from the Silent Guitar, and then place in the individual parts in the case as shown in
the illustration below.
• Put the left frame into the case’s larger pocket.
• Put the power adaptor into the smaller pocket in the case and secure the cover using the Velcro® tape.
• When laying the case down with the instrument packed inside, make sure that the case is placed with the
guitar’s bridge side facing up.
Placing the instrument in the soft case does not guarantee against any damages
to individual parts.
The soft case is designed for storing and transporting the instrument, and protecting it from dust, etc. Do
not position the instrument with its bridge side facing down in the case, and do not cause any damage to
the instrument by placing any objects on top of the case, hitting it, etc.
Power adaptor
Left frame
Using the Soft Case
Silent Guitar main body
02_slg100s_en.pm65 06.8.22, 11:05 AM 11