Xantech XDT77 - Manual (Page 8)

8
Radio Reception
When the TUNING/PRESET button is pressed momentarily (0.5
second or less), the frequency changes by a fixed step.
FM : 0.2 MHz steps
AM : 10 kHz steps
Press the TUNING/PRESET button repeatedly until the station
you want to listen to is found.
Pressing this button alternates between Stereo mode and
Mono mode.
Stereo
FM stereo broadcasts are received in stereo and the
"STEREO" indicator lights in the display.
Mono
To compensate for weak FM stereo reception, select this
mode. Reception will now be forced monaural, reducing
unwanted noise.
Press the POWER switch to turn the unit on. 1
Select the AM or the FM band by pressing the corresponding
button. 2
Press the DIRECT button to select the manual tuning mode. 3
Select the station you want to listen to.
< "TUNED" is displayed when a broadcast is correctly tuned in.
Auto Selection A
4
FM MODE Button
Example
To select FM 88.30 MHz : 8q8q3
To select AM 1220 kHz : 1q2q2q0
< When no button is pressed for 3 seconds, the mode will be
cancelled.
1 3 2 4 3 2 4
TUNER 1 TUNER 2
FM MODE
(TUNER 1) FM MODE
(TUNER 2)
Hold down the TUNING/PRESET button for 0.5 to 2 seconds.
When a station is tuned in, the tuning process will stop
automatically.
If you want to stop the tuning process, press the
TUNING/PRESET button.
Manual Selection
(Selecting stations which cannot be tuned automatically) B
Direct Tuning
Input the frequency numbers with the numeric buttons.
C