Xantech XDT77 - Manual (Page 9)

9
Preset Tuning 1
While the MEMORY indication is flashing select the preset
you would like to use for this station by EITHER:
Scroll up or down using the TUNING/PRESET buttons until the
preset is displayed. Then press the MEMORY button to store
5
2 1 5
3
5
4
2 1 5
3
5
4
TUNER 1 TUNER 2
5 5
Manual Memory Presetting
You can store your favorite FM and AM stations into any of the 30
preset locations by:
Select the AM or FM band by pressing the corresponding
band button. 1
Press the DIRECT button to select the “manual tuning” mode. 2
Select the station you would like to store by scrolling through
the station using the TUNING/PRESET buttons or directly tune
the station by using the numeric buttons. 3
Once the station is tuned, press the MEMORY button. 4
To store more stations, repeat steps through . 5 3
OR enter the 2-digit preset number using the numeric pad. (For
instance “05” will store the station in preset number 5. “25”
will store the station in preset location 25.) The preset will
automatically be stored and the memory indication will stop
flashing.