XiNCOM Twin WAN XC-DPG503 - Manual (Page 46)

46
Advanced LAN Configuration
For the XC-DPG503 Gateway’s Routing Table
Entry 1 (Segment 1)
Destination IP Address
192.168.2.0
Network Mask 255.255.255.0
Gateway IP Address 192.168.1.100
Interface LAN
Metric 2
Entry 2 (Segment 2)
Destination IP Address
192.168.3.0
Network Mask 255.255.255.0 (Standard
Class C)
Gateway IP Address 192.168.1.100
Interface LAN
Metric 3
Configuring other Routers on you LAN
All traffic for devices not on the local LAN must be forwarded to the XC-DPG503 so that they can be
forwarded to the Internet. This is done by configuring other Routers to use the XC-DPG503 as the Default
Route or Default Gateway, as illustrated by the example below:
Configuration settings for the LAN shown with 2
routers and 3 LAN segments, the XC-DPG503
requires 2 entries as follows.
For Router A’s Default Route
Destination IP Address 0.0.0.0
Network Mask 0.0.0.0
Gateway IP Address 192.168.1.1
Metric 2
For Router B’s Default Route
Destination IP Address 0.0.0.0
Network Mask 0.0.0.0
Gateway IP Address 192.168.2.80
Interface LAN
Metric 3