XiNCOM Twin WAN XC-DPG503 - Manual (Page 5)

Features
Built-in VPN Endpoint
Full VPN Endpoint with support for up to 50 VPN tunnels using the IPsec encryption protocol.
Multiple Connection Methods
All popular DSL and Cable Modems and connection methods are supported, including Fixed IP, Dynamic
IP, PPPoE, even multiple-session PPPoE.
2 x 10/100 WAN Ports
The XC-DPG503 incorporates dual 10/100 WAN ports, complete with auto-crossover for easy
connection to an existing network. All popular DSL and Cable Modems and connection methods are
supported, including Fixed IP, Dynamic IP, PPPoE, even multiple-session PPPoE.
4-Port 10/100 Switch
The XC-DPG503 incorporates a 4-port 10/100 N-Way Ethernet Switch, complete with auto crossover for
easy connection to an existing network.
Automatic Fail-over
If one broadband connection goes down all traffic is automatically re-routed through the second
broadband connection.
Stateful Packet Inspection (SPI) Firewall
Protects your network using advanced SPI against malicious and DDoS attacks.
Advanced NAT features
Access Filters, DMZ, DDNS, Remote Management, Dynamic or Static Routing, Special Applications,
Virtual Servers, SNMPv1.
Access Filter
Gain fine control over the Internet access and applications available to LAN users with a powerful URL
Blocking Engine. Five (5) user groups are available, and each group can have different access rights.
Block URL
Use this feature to block access to undesirable Web sites by LAN users. You can even have different
settings for different groups of PCs.
Figure 2. Load Balancing
Load Balance two concurrent broadband connections in any combination to expand a
network’s bandwidth to the Internet. The XC-DPG503 supports T1, xDSL, Cable, and Satillite
broadband connections.
Active connection from the ISP
The XC-DPG503 load balances
both inbound and outbound
traffic requests.
Figure 3. Automatic Fail-over
In the event of one connection going down, all traffic is re-routed to the second WAN
port utilizing the live broadband connection from the second ISP. This provides true
redundancy to ensure a network remains connected to the Internet.
Active connection from the ISP
Inactive connection from the ISP
All incoming and outgoing
traffic from a LAN has an
uninterrupted connection to
the Internet when one of the
two connections fail.
Figure 1. How it works
Solid VPN Security
Full VPN Endpoint with
support for up to 50 VPN
tunnels using the IPSec
encryption protocol.
5