ZyXEL Communications Prestige 650HW - Manual (Page 163)

Prestige 650HW ADSL Router User’s Guide
11-10 Firmware and Configuration File Maintenance
TFTP client program. For UNIX, use “get” to transfer from the Prestige to the computer, “put” the other
way around, and “binary” to set binary transfer mode.
11.4.5 Example: TFTP Command
The following is an example tftp command:
TFTP [-i] host put firmware.bin ras
where “i” specifies binary image transfer mode (use this mode when transferring binary files), “host” is the
Prestige’s IP address, “put” transfers the file source on the computer (firmware.bin – name of the firmware
on the computer) to the file destination on the remote host (ras - name of the firmware on the Prestige).
Commands that you may see in third party TFTP clients are listed earlier in this chapter.
TFTP over WAN will not work if you have applied a filter in menu 11.5 (WAN) to block Telnet service.