ZyXEL Communications Prestige 650HW - Manual (Page 72)

Prestige 650HW ADSL Router User’s Guide
4-4 Remote Node Configuration
Figure 4-2 Menu 11.1 — Remote Node Profile
In Menu 11.1 – Remote Node Profile, fill in the fields as described in the following table.
Table 4-1 Remote Node Profile Menu Fields
FIELD DESCRIPTION EXAMPLE
Rem Node Name Type a unique, descriptive name of up to eight
characters for this node. myISP
Active Press [SPACE BAR] and then [ENTER] to select Yes to
activate or No to deactivate this node. Inactive nodes
are displayed with a minus sign “–“ in SMT menu 11. Yes
Encapsulation PPPoA refers to RFC-2364 (PPP Encapsulation over
ATM Adaptation Layer 5).
If RFC-1483 (Multiprotocol Encapsulation over ATM
Adaptation Layer 5) of ENET ENCAP are selected,
then the Rem Login, Rem Password, My Login, My
Password and Authen fields are not applicable (N/A). ENET ENCAP
Multiplexing Press [SPACE BAR] and then [ENTER] to select the
method of multiplexing that your ISP uses, either VC-
based or LLC-based. LLC-based
Service Name When using PPPoE encapsulation, type the name of
your PPPoE service here. N/A
Menu 11.1 - Remote Node Profile
Rem Node Name= myISP
Active= Yes
Encapsulation= ENET ENCAP
Multiplexing= LLC-based
Service Name= N/A
Incoming:
Rem Login= N/A
Rem Password= N/A
Outgoing:
My Login= N/A
My Password= N/A
Authen= N/A
Route= IP
Bridge= No
Edit IP/Bridge= No
Edit ATM Options= No
Telco Option:
Allocated Budget(min)= N/A
Period (hr)= N/A
Schedule Sets= N/A
Nailed-Up Connection= N/A
Session Options:
Edit Filter Sets= No
Idle Timeout (sec)= N/A
Press ENTER to Confirm or ESC to Cancel: