X10 Wireless Technology UR86A - Manual (Page 14)

27 26
If you have installed the Transceiver
Module (sold separately) you can control
it and other X10 modules as follows:
1. Press and release the
X10 button.
2. Use the number
buttons to enter the
Unit Code number of
the chosen module.
(You do not need to
enter ‘0’ first for a
single digit number.)
3. Press the appropriate
button for the
function you require,
e.g. Ch+ (see
below).
X10 Functions:
On: CHANNEL +
Off: CHANNEL –
Bright: VOLUME +
Dim: VOLUME –
All Lights On: POWER
All Modules Off: MUTE
Note: You cannot dim or brighten an
Appliance Module. If the module was off
and you press Bright or Dim (VOLUME+
or VOLUME-) this will simply turn the
module on.
C
ONTROLLING
X10
M
ODULES
L
AMP
M
ODULE
The Lamp Module (sold separately) may
be used to control any incandescent lamp
rated up to 300W. It is not suitable for
other types of lamps such as fluorescent
or energy saving lamps, or lamps which
include a dimmer control.
Caution: Do not connect an appliance
such as a coffee pot or heater to the
Lamp Module. It may damage the
Module and the appliance and could
cause a fire hazard.
1. Set the House Code
to ‘A’ and the Unit
Code to ‘2.’
2. Plug a lamp into the
Lamp Module.
3. Plug the Lamp
Module into a
convenient AC
outlet.