Disabling jet substitution mode – Xerox COLORQUBE 8870 User Manual
Page 174
Troubleshooting
ColorQube 8570/8870 Color Printer
User Guide
174
7.
Select the number of the weak or missing jet (1 to 309) and then press OK to confirm the
selection.
Note:
If you need to substitute more jets, select Save Change and Select Another Jet and repeat
steps 6 and 7.
8.
Select Save Change and Exit > OK to complete the procedure.
Disabling Jet Substitution Mode
1.
On the printer control panel, select Troubleshooting and then press the OK button.
2.
Select Print Quality Problems > OK.
3.
Select Eliminate Light Stripes > OK.
4.
Select Jet Substitution Mode > OK.
5.
Select Turn Jet Substitution Mode Off > OK.
Note:
Any saved and stored jobs on the printer’s hard drive, if the hard drive option is present and
enabled, must be resubmitted to print correctly while Jet Substitution is enabled.