Zebra Technologies P1013372-001 REV. A - Manual (Page 56)

52 Zebra ZXP Series 8 Card Printer with Laminator P1013372-001 Rev. A
Operation
Operator Control Panel (OCP)
Operator Control Panel ( OCP )
The printer is equipped with an OCP Display and three OCP Buttons which give access to the
printer menus. The menus can be accessed when the printer status shows
READY .
• Press the MENU button, to access the Main Menu.
• Press the INFO button, to access and view the Printer Settings Menu.
• Press the CANCEL button, to cancel the current print job in the printer.
Messages
Your printer is equipped with an OCP Display to provide printer status information. The
readout is controlled by three OCP Buttons directly below the OCP Display. The messages
displayed fall into three categories:
• Operational, see Page 53 .
• Warning, see Page 54 .
• Error, see Page 54 .
READY
ZXP Series 8
INFO CANCEL MENU
Message
Button Functions
Buttons