Laminator – Zebra Technologies P1013372-001 REV. A User Manual
Page 92
Advertising
88
Zebra ZXP Series 8 Card Printer with Laminator
P1013372-001 Rev. A
ZXP Series Toolbox
Information
Laminator
This information cannot be edited or changed by the user; however, this information may be
useful for Zebra trained and certified personnel in diagnosing or evaluating laminator status.
•
Status information includes Warnings and Faults; Communications, AC Power, and
Heated Rollers; Top (Surface and Ambient) and Bottom (Surface and Ambient)
temperatures; and Line Voltage and Line Frequency.
•
Firmware lists the version of the Firmware.
•
Sensors details the state of each laminator sensor.
•
Odometer shows Total up time, Heater on time, the number of Cards processed, and the
number of Cards laminated.
Advertising