ZyXEL Communications ZyXEL ZyWALL USG-1000 - Manual (Page 2)

2
ENGLISH
1 Checking the Package Contents
2 Rack-mounted Installation
Mount the ZyWALL in a 19-inch rack or place it on a sturdy, flat surface.
Note: Leave 10 cm of clearance at the sides and 20 cm in the rear.
1 Align one bracket with the holes on one side of the ZyWALL and secure it with the included bracket
screws. Similarly, attach the other bracket.
2 After attaching both mounting brackets, position the ZyWALL in the rack by lining up the holes in the
brackets with the appropriate holes on the rack. Secure the ZyWALL to the rack with the rack-mounting
screws.
Your package should
include one of each
of the following: • ZyWALL
• Power cord
• Rack-mounting kit • RJ-45 Ethernet cable
• RS-232 console Y-cable
• Printed Quick Start Guide • Configuration Reference Card
• Compact disk (CD)