ZyXEL Communications ZyXEL ZyWALL USG-1000 - Manual (Page 6)

ENGLISH
6
6 Default Settings and Port Details
The ZyWALL is configured for the following network topology by default.
Note: The USB ports, extension card slots, and hard disk slot are reserved for future use.
Port Interface Zone IP Address and DHCP Settings Suggested Use With Default Settings
P1 ge1 LAN 192.168.1.1, DHCP server enabled Protected LAN
P2, P3 ge2, ge3 WAN DHCP clients Connections to the Internet
P4, P5 ge4, ge5 DMZ None, DHCP server disabled Public servers (such as web, e-mail and
FTP)
AUX aux None None Auxiliary modem
CONSOLE N/A None None Local management
Label Type Cable to Use
P1~ P5 RJ-45 8-wire Category 5e or above Ethernet cable
AUX, CONSOLE RS-232 RS-232