Xerox 1075 - Manual (Page 14)

Getting Started
8
1
Guide to This Machine
Control Panel
1. Shows errors and machine status.
m: Data In indicator
The Data In indicator shows the status of
data reception from a computer.
• This indicator blinks when data is be-
ing received.
• This indicator goes on when there is
data remaining to be printed.
L: Service call indicator
x: Misfeed indicator
M: Cover indicator
d: Staple indicator
D: Toner indicator
2. {{{{User Tools/Counter}}}} key
• User Tools
Press to change the default settings
and conditions to meet your require-
ments.
• Counter
Press to display or print the total num-
ber of copies made.
• Inquiry
Press to check where to contact to
have the machine repaired or to order
toner.
3. {{{{Job List}}}} key
Shows the job list. See “Job List”, General
Settings Guide.
4. Display panel
Shows operation status, error messages,
and function menus.
⇒ p.9 “Display Pan-
el”
5. {{{{Energy Saver}}}} key
Press to switch to and from the Energy
Saver mode. See “ENERGY STAR Pro-
gram”, General Settings Guide .
Note
❒ This key is ineffective during system
setting (User Tools) operations.
6. Main power indicator
This indicator goes on when the main
power switch is turned on.
Important
❒ Do not turn off the main power
while the On indicator is blinking.
Doing so may damage the hard
disk.
7. On indicator
This indicator goes on when the opera-
tion switch is turned on.
ZGXS301N