Xerox 1075 - Manual (Page 27)

21
2. Installing the Printer Driver
and Software
This manual assumes that you are familiar with general Windows procedures
and practices. If you are not, see the documentation that comes with Windows
for details.
Installation Method
❖ ❖ ❖ ❖ Installing using Auto Run
Inserting the CD-ROM into the CD-ROM drive starts the installer automati-
cally. The installer helps you install the following printer drivers and soft-
ware easily.
The following table shows the printer drivers and software that can be in-
stalled using Auto Run.
*1 Available operating systems are as follows: Windows 95/98/Me, Windows
2000/XP, Windows NT 4.0. Auto Run is unavailable with Macintosh.
Reference
When the machine is connected to the computer using the IEEE 1394 inter-
face or the USB2.0 interface, install the printer drivers separately.
⇒ p.43 “Installing the Printer Driver Using USB”
⇒ p.46 “Installing the Printer Driver Using IEEE 1394”
Auto Run *1
Quick Install Add Printer and
Utility Wizard
Network connection
with TCP/IP Parallel connection
PCL 6 printer driver ❍ ❍ ❍
PCL 5e printer driver
❍
RPCS™ printer driver ❍ ❍ ❍
PostScript 3 printer
driver
❍
Agfa Monotype Font
Manager 2000
❍
SmartNetMonitor for
Admin
❍
SmartNetMonitor for
Client
❍ ❍