Yamaha VCD-102K - Manual (Page 15)

1
Load discs on the disc tray.
2
Press the KARAOKE button so that “KARAOKE” lights
up on the display. To cancel it, press the KARAOKE
button once again.
3
4
Select the disc (before “DISC” and “MUSIC” stop
flashing on the display).
5
Select the track (before “DISC” and “MUSIC” stop
flashing on the display).
6
7
To start play, press the PLAY/REPEAT button.
* This unit pauses whenever a play of track ends. To start
playing the next track, press the PLAY/REPEAT button.
8
Repeat step 3–6 to program more selections.
9
If necessary, change the audio output mode by pressing
the MPX button.
Use the KEY CONTROL buttons and the LEVEL and
ECHO controls as you prefer. (See page 14 for details.)
Notes
● In step 4 or 5, if “DISC” and “MUSIC” stop flashing on the
display before you finish programming a track, press the
PROG button again.
● If you program a track number which is higher than the
highest track number on the disc, “E rr” appears on the
display and it cannot be programmed.
● This unit can store as many as 10 selections at one time. If
you program a track number as the eleventh program, the
tenth program is replaced with it.
ECHO DISC SKIP SKIP/SEARCH
PREV NEXT
7 8 9 0
LEVEL
KEY CONTROL
MIC 1 MIC 2
OPEN/CLOSE
STOP/RETURN
PLAY/SELECT
PLAYXCHANGE
MIN MAX MIN MAX
15
English
PRE-PROGRAMMING SELECTIONS
(FOR SINGING KARAOKE)
●
Programming is possible either while the unit is playing a
disc or stopped.
●
As many as 10 selections can be stored at one time.
KEY CONTROL
KARAOKE MPX
OPEN/CLOSE
ON SCREEN
PROG ENTER S/F REP CANCEL
1 2 3 4 5
6 7 8 9 0
+10
DISC SKIP
TIME INDEX
INDEX
SEARCH
SKIP PREV
RETURN SELECT
NEXT
INTRO DIGEST
PAUSE SLOW PLAY/REPEAT STOP
1 2 3 4 5
6 7 8 9 0
+10
SELECT
PLAY/REPEAT
PROG
DISC SKIP
KARAOKE
KARAOKE
MUSIC L R DISC
ENTER
5
9
2
6
7
3
9
4
Flashes.
9