Zanussi LA VITA E BELLA ZWH7120 P - Manual (Page 14)

14
Display
(continues)
After the program has started, the time remaining is
updated every minute.
The selected delay (20 hours max) set by means of the
relevant button appears on the display for about 3
seconds, then the duration of the previously selected
program is displayed. The delay time value decreases by
one unit every hour and then, when 1 hours remain, the
time decreases every minute.
Delayed start
If an option which is not compatible with the set wash
programme is selected, the message
is displayed
for about 2 seconds and the integrated red Start/Pause
light start flashing.
Incorrect option selection
In the event of operating problems, some alarm codes
can be displayed, for example E20 (see paragraph
“Something not working”).
Alarm codes
When the program has finished a flashing zero is
displayed.
End of programme
When the door has not been closed a flashing E40 is
displayed.
Door open
To start the selected program, press the “Start/Pause”
button; the corresponding green pilot light stops
flashing.
To interrupt a program which is running, depress the
“Start/Pause” button: the corresponding green pilot
light starts to flash.
To restart the program from the point at which it was
interrupted, press
the “Start/Pause” button again.
If you have chosen a delayed start, the machine will
begin the countdown.
Start/Pause button
Delay Start Button
Before you start the program, this option makes it
possible to delay the starting of the washing program by
30 min - 60 min - 90 min, 2 hours and then by 1 hour till
20 hours.
The selected delay time will appear on the display for
about 3 seconds, then the duration of the program will
appear again.