ZyXEL Communications NPS-520 - Manual (Page 29)

Chapter 2 ZyXEL Utility
NPS-520 User’s Guide
29
2.8 The About Screen
The About screen displays driver and utility version numbers of the NPS-520. To display the
screen as shown below, click the about (
) button.
Figure 11 About
The following table describes the read-only fields in this screen.
System Reboot Click Reboot Now to restart your NPS-520 without turning the power off. This
allows your current new settings to take effect immediately but does not return
the NPS-520 to its default configuration.
When the NPS-520 finishes rebooting, the following screen displays. Click OK
to go back to the System Setting screen.
Port Force Release Use the Force Release button to drop the connection between the printer and
a computer.
When a computer is always occupying the connection to the printer without
enabling Auto Release and/or Auto Connect, you can stop that computer’s
connection to the printer by using this feature from the utility on your computer.
Table 7 ZyXEL Utility: System Setting (continued)
LABEL DESCRIPTION
Table 8 About
LABEL DESCRIPTION
Driver version This field displays the version number of the NPS-520 driver.
Utility version This field displays the version number of the ZyXEL utility.