Yamaha CRW2200IX - Manual (Page 20)

Setup Procedures
12
Macintosh Users
Install the CD writing software.
STEP
1
Make sure that system configuration (CPU,
RAM, OS, etc.) of your computer meets the
requirements of the CRW2200IX drive (→
→ → →P. 5).
Set up the CRW2200IX drive (→ → → →P. 13 – 17).
1 Turn your computer and the drive both on before
connecting.
2 Connect your computer and the drive using the
IEEE1394 interface cable that came with the drive.
Make sure that the CRW2200IX drive
is correctly recognized (→
→ → →P. 19)
Before using the drive, make sure that the drive is
recognized by the MacOS and CD writing software on
your computer.
Start using the CRW2200IX drive
Use the drive to create an audio CD, to backup data on your
hard drive, or for whatever purpose suits your needs.
STEP
2
STEP
3
00GB-.book Page 12 Wednesday, June 27, 2001 7:24 PM