Yamaha CRW2200IX - Manual (Page 27)

Setup Procedures
19
Macintosh Users
1 1 1 1 Select “Apple System Profiler” from the Apple menu.
2 2 2 2 In the Apple System Profiler window, click the “Devices and Volumes”
tab.
A : Make sure that “fw609e” and “sbp609e” are displayed in the
FireWire column, showing that it is recognized by the Mac OS.
B : You can also check the FireWire version in this window.
Notes
• If you connect one or more storage devices other than the CRW2200IX drive, with the
FireWire interface, “fw609e” and “sbp609e” are displayed in this window. To make sure
that the CRW2200IX drive is recognized, drag and drop other FireWire interface device’s
icons onto Trash to unmount, and disconnect those devices temporarily.
• If “FireWire” is not displayed in this window, FireWire interface devices are not
recognized on the OS. Contact the supplier of your Apple Product.
• When “FireWire” is displayed in this window, if “fw609e” and “sbp609e” are not
displayed, the CRW2200IX drive is not recognized. Consult your nearest Yamaha dealer
for repair.
• The FireWire version that supports the CRW2200IX drive is 2.0 or later.
• If the Apple System Profiler recognizes the CRW2200IX drive, but extension files
supporting the drive are not installed, the disc cannot be mounted or read.
Extension files are included in the CD writing software.
For details, refer to the documentation that came with your CD writing software.
Your CD writing software will show a device name, YAMAHA CRW2200E, which
corresponds to the CRW2200IX drive (product name).
For information on how to verify the CRW2200IX drive installation in your CD writing
software, refer to the documentation that came with it.
A
B
00GB-.book Page 19 Wednesday, June 27, 2001 7:24 PM