ZyXEL Communications STB-1001H - Manual (Page 3)

ENGLISH
2
1 Make Hardware Connections
Take the following steps to set up your STB-1001H’s hardware connections. Use either the
cables that came with your STB-1001H, or those that came with your TV or Internet access
device.
1 Connect your TV (and audio system, if required) to the STB-1001H’s audiovisual ports
using either the included cables or those that came with your TV. Refer to the next
figure for some example connections.
2 Connect your Internet access device (such as a broadband modem or router) to the
STB-1001H’s RJ-45 port.
3 Using the included power adaptor, connect the STB-1001H’s POWER port to a suitable
power source.