ZyXEL Communications STB-1001H - Manual (Page 4)

ENGLISH
3
The STB-1001H has a variety of options for connecting your TV (and audio system). Use
the hardware connections best suited to your equipment; the following figure shows some
examples.
2 Turn the STB-1001H On
Once you have made the hardware connections, take the following steps to start up the
STB-1001H.
1 Turn your television on. Change it to the channel or setting you normally use to watch
videos or DVDs. For example, select the “VIDEO” input option, or press the “AV” button
(look at the documentation that came with your TV if you are not sure what to do).
2 Press the ON/OFF button on the rear of the STB-1001H.
The light on the front of the STB-1001H lights up. It blinks while the STB-1001H is
starting up, then shines steadily green once the STB-1001H is ready (this may take a little
while).
The
light on the front of the STB-1001H turns green once the STB-1001H has finished
starting up.