ZyXEL Communications ZyXEL ZyAIR 100 User Manual
Page 247
ZyWALL 10~100 Series Internet Security Gateway
Remote Management Screens
16-9
Table 16-4 SNMP Traps
4
authenticationFailure (defined in
RFC-1215)
A trap is sent to the manager when receiving any SNMP
get or set requirements with the wrong community
(password).
6
whyReboot (defined in ZYXEL-
MIB)
A trap is sent with the reason of restart before rebooting
when the system is going to restart (warm start).
6a
For intentional reboot :
A trap is sent with the message "System reboot by user!"
if reboot is done intentionally, (for example, download new
files, CI command "sys reboot", etc.).
6b
For fatal error :
A trap is sent with the message of the fatal code if the
system reboots because of fatal errors.
16.6.3 REMOTE MANAGEMENT: SNMP
To change your ZyWALL’s SNMP settings, click REMOTE MANAGEMENT, then the SNMP tab. The
screen appears as shown.