3 applying remote node filters – ZyXEL Communications ZyXEL ZyAIR 100 User Manual
Page 422
ZyWALL 10~100 Series Internet Security Gateway
31-18
Filter
Configuration
Figure 31-14Filtering DMZ Traffic
31.6.3 Applying Remote Node Filters
Go to menu 11.5 (shown below – note that call filter sets are only present for PPPoE encapsulation) and
enter the number(s) of the filter set(s) as appropriate. You can cascade up to four filter sets by entering their
numbers separated by commas. The ZyWALL already has filters to prevent NetBIOS traffic from triggering
calls, and block incoming telnet, FTP and HTTP connections.
Figure 31-15 Filtering Remote Node Traffic
Menu 11.5 – Remote Node Filter Setup
Input Filter Sets:
protocol filters=
device filters=
Output Filter Sets:
protocol filters=
device filters=
Press ENTER to Confirm or ESC to Cancel:
Menu 5.1 – DMZ Port Filter Setup
Input Filter Sets:
protocol filters=
device filters=
Output Filter Sets:
protocol filters=
device filters=
Press ENTER to Confirm or ESC to Cancel: