ZyXEL Communications Ethernet-to-Fiber Media Converter MC1000-SFP-FP - Manual (Page 15)

MC1000-SFP-FP User’s Guide
15
C
H A P T E R
2
Fiber-optic Connection
2.1 Overview
To make the MC1000-SFP-FP fiber-optic connection you need to:
1 Open the MC1000-SFP-FP
2 Disable DIP switch 1 (LFS)
3 Install an SFP transceiver
4 Attach the wire mounts
5 Insert a fiber-optic cable through a bushing and wrap it around the wire mounts
6 Connect the fiber-optic cable to the SFP transceiver
7 Enable DIP switch 1 (LFS)
1
Only qualified technicians should perform these actions! Please skip this
chapter if you are not a qualified technician.
2.2 Open the MC1000-SFP-FP
1 First remove both screws from the housing.
Figure 5 Remove The Housing Screws
2 Then lift open the cover as shown.