Xantrex Technology Powerpack 100 - Manual (Page 31)

26
Recharging the Powerpack
When household AC power is available, the
Powerpack can be recharged using the AC Charger.
You can also charge the Powerpack using the inverter
module with the DC input cable while you drive your
vehicle.
To recharge the Powerpack using household
power:
1. If the inverter module is connected to the
Powerpack, disconnect any devices plugged into
the inverter and disconnect the inverter from the
Powerpack.
2. Plug the AC Charger into the Powerpack AC
charger input.
3. Plug the other end of the AC Charger into a
standard AC wall outlet. See Figure 6.
4. While the Powerpack is recharging, the blue LED
flashes every two seconds. When the Powerpack
is fully charged, the blue LED glows steadily.
A typical recharge may take up to 11 hours.