Xantrex Technology Powerpack 100 - Manual (Page 35)

30
7 Troubleshooting
General
PROBLEM: Measured inverter output is too low.
Inverter Powered by DC Input Cable
PROBLEM: AC product will not operate, no inverter
lights are
ON
.
Possible cause Remedy
Standard “average-
reading” AC voltmeter
used to measure output
voltage, resulting in an
apparent reading 5 to 15 V
too low. Inverter’s “modified sine
wave” output requires “true
RMS” voltmeter for accurate
measurements.
Vehicle battery or
Powerpack voltage is too
low. Recharge vehicle battery or
Powerpack.