Zebra Technologies RW 220 - Manual (Page 5)

5
RW 220 Vehicle Cradle Installation Guide
Introduction
Note: Zebra Technologies Corporation is not liable for personal injury or
damage to any equipment caused by the improper installation of this
equipment to any power source.
Caution- This equipment should be installed in accordance with this instal-
lation guide and under the supervision of properly trained and qualified
personnel.
The RW 220 Vehicle Cradle allows use of the Zebra ® RW 220
Receipt Printer in a vehicle. The Vehicle Cradle can be used in con-
junction with a Zebra RCLI series charger module, which will use
the vehicle’s battery as a power source to run and charge the RW
220 printer’s battery. Refer to the installation guide supplied with
the charger for complete use and installation instructions and
safety precautions.
An optional mounting arm provides the ability to locate the
Printer and Vehicle Cradle in a variety of positions and mounting
orientations to enhance its accessibility and ease of use.
The following instructions detail the installation and use of the
RW 220 Vehicle Cradle. Following these instructions closely will
ensure safe, reliable performance of the RW 220 Printer when in-
stalled in the Cradle.
The Printer runs off its own battery. If you are using this product
in conjunction with a Zebra Mobile Charger, the charger module
will only monitor and charge the printer’s battery.
The user should always refer to the RW Series Quick Start Guide
supplied with the printer, or the RW Series Users Guide for com-
plete information on using the Printer. The Users Guide is available
on-line at www.zebra.com