ZyXEL Communications Prestige 2000W - Manual (Page 32)

Prestige 2000W_V2 User’s Guide
32 Chapter 3 Wireless LAN Setup Menus
3.2 SSID
(Service Set ID) The SSID identifies the Service Set with which a wireless station is
associated. Wireless stations associating to the access point (AP) must have the same SSID.
You can think of the SSID as being similar to a workgroup name in a Microsoft network. Do
the following to display the SSID that the Prestige is using.
3.3 Network Mode
The 802.11b_AdHoc network is the simplest WLAN configuration, defined as two or more
wireless devices within range of each other that form an independent network without the need
of an access point (AP).
An Infrastructure network has an that allows wireless clients to connect to the wired
network.
Do the following to select the network mode that the Prestige is to use.
1 Select Wireless in the first menu screen (use the up or down
arrow to highlight it and then press the Left key).
8. Restart
1. Information
Select Back
2 Select SSID.
3. Network Mode
4. Channel
Select Back
3 The Prestige displays the channel that it is currently using. Channel
6
OK Back
7. Wireless
2. SSID
1 Select Wireless in the first menu screen (use the up or down
arrow to highlight it and then press the Left key).
8. Restart
1. Information
Select Back
7. Wireless