ZyXEL Communications NBG334W - Manual (Page 91)

Chapter 5 Wireless LAN
NBG334W User’s Guide
91
Figure 44 WPS
The following table describes the labels in this screen.
5.9.2 WPS Station Screen
Use this screen when you want to add a wireless station using WPS. To open this screen, click
Network > Wireless LAN > WPS Station tab.
"
Note: After you click Push Button on this screen, you have to press a similiar
button in the wireless station utility within 2 minutes. To add the second
wireless station, you have to press these buttons on both device and the
wireless station again after the first 2 minutes.
Table 35 WPS
LABEL DESCRIPTION
WPS Setup
Enable Select this to enable the WPS feature.
PIN Number This displays a PIN number last time system generated. Click Generate to
generate a new PIN number.
WPS Satus
Status This displays the WPS status.
Apply Click Apply to save your changes back to the NBG334W.
Refresh Click Refresh to get this screen information afresh.