Zanussi ZWG 3142 - Manual (Page 13)

71
The light of the START/PAUSE button starts to flash.
5. Select the spin speed or option or
Turn the selector dial to the required position.
6. Select the required options
The light corresponding to the depressed button
illuminates.
7. Start the programme
Depress START/PAUSE-button, the corresponding
pilot light stops flashing. The Prélavage/Lavage
(Voorwassen/Wassen) light illuminates.
Départ/
Pause
Start/
Pauze
Départ/ Pause
Start/
Pauze
Halve
belading
Prélavage Voorwas
Court Kort
Demi- charge
Nacht-
cyclus
Rinçage +
Spoelen +
Nuit silence
500
700
900
1400
A
D
B
C
L
F
G
H J K
M
N
P
Q
R
Operating sequence
Before the first wash we recommend that you pour 2
litres of water into the main wash compartment
of the detergent drawer in order to activate the ECO
valve. Then run a cotton cycle at 95°C, with the
machine empty, in order to remove any
manufacturing residue from the drum and tub.
Pour half a measure of detergent into the main wash
compartment and start up the machine.
1. Place the laundry in the drum
Open the door.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible.
Close the door.
2. Measure out the detergent
Pull out the dispenser drawer until it stops. Measure
out the amount of detergent recommended by the
manufacturer in a graduated cup and pour it into the
main wash compartment
.
If you have selected the prewash, pour detergent
into the appropriate compartment marked
.
3. Measure out the additive
If required, pour fabric softener into the
compartment marked
, without exceeding the
«MAX» mark.
4. Select the desired programme
Turn the programme selector dial to the desired
position.
P1180 P1179
132986270GB.qxd 09/02/2005 11.29 Pagina 71