Xerox VW37L - Manual (Page 27)

VIZIO VW37L HDTV30A User Manual
Version 4/2/2008 27
www.VIZIO.com
2.9 2.9 2.9 2.9 Setting Up to Watch Television Setting Up to Watch Television Setting Up to Watch Television Setting Up to Watch Television
For ‘Preparing Your LCD HDTV for Wall Mounting’, see page 6.
2.10 2.10 2.10 2.10 Basic LCD HDTV Start Up Basic LCD HDTV Start Up Basic LCD HDTV Start Up Basic LCD HDTV Start Up
1. Connecting the Power Cable
Connect the power cord to the power cord connector on the back of the High Definition TV, and
then plug the power cord into an AC wall socket.
2. Connect Audio and Video Cables to the HDTV
(see pages 13 ~ 25 for detailed steps)
3. Turning Power On
Once all the components are connected, press the Power ON button on the side of the High
Definition TV, or press the Power ON (Red) button on the remote control.
4. Initial Setup
After powering on the TV set, the Initial
Setup screen will come up; please press
the button on the remote control.
a. The Language choice screen will
be displayed; the default English
option is highlighted. If you wish
to change the OSD language to
Español or Français, press the
button on the remote control to
select the language you want.
Press the button on the
remote to go to the next screen.
Note: At this point, i f a Set-Top Box from your Local Cable or Satellite Service Company or other
equipment is being used; please press the LAST key on the remote control and go to Step 5. If this is not
your case, please continue at Step b.