Xerox VW37L - Manual (Page 6)

VIZIO VW37L HDTV30A User Manual
Version 4/2/2008 6
www.VIZIO.com
Preparing Your LCD HDTV for Wall Mounting Preparing Your LCD HDTV for Wall Mounting Preparing Your LCD HDTV for Wall Mounting Preparing Your LCD HDTV for Wall Mounting
The VIZIO VW37L HDTV30A can either be kept on the stand base or mounted on the wall for viewing. If
you choose to mount the VW37L HDTV30A on the wall, please follow the instructions below for removing
the stand base.
To remove the stand base To remove the stand base To remove the stand base To remove the stand base
1. Unplug all of the cables and cords
from your VIZIO VW37L HDTV30A.
2. Place the VW37L HDTV30A face
down on a soft and flat surface
(blanket, foam, cloth, etc) to prevent
any damage to the TV.
3. Remove the eight (8) screws holding
the base to the VW37L HDTV30A.
4. Carefully remove the stand base.
Now, the VW37L HDTV30A can fit securely to
a mount (sold separately) by utilizing the
mounting holes in the center of the back panel
of the High Definition TV. Please make sure to
read the instructions of your specific mount to
properly hang the VW37L HDTV30A.
The pitch of the mounting holes is 510mm
horizontally and 200mm vertically.
The screw type required is metric M8, 1.25mm
pitch. The length of the screws will depend on
the thickness plate being attach to the TV set,
our brackets come with different length
screws.
To find the perfect mount for the VIZIO VW37L HDTV30A, browse VIZIO’s certified mount selection at
www.VIZIO.com or call directly 888-VIZIOCE (888-849-4623).