Yamaha AW2400 - Manual (Page 43)

43
AW2400 Owner’s Manual
Recording to a sound clip
5
Chapter 5
Recording to a sound clip
The AW2400 has a Sound Clip function that lets you record and play back
independently of the recorder section. You can use a sound clip to quickly
record and play back your performances on an audio source connected to
the AW2400. This is an ideal way to capture ideas for a song or arrangement,
or to record a simple accompaniment for practicing a part.
This chapter explains how sound clips can be recorded using an instrument
or microphone connected to an input jack.
The post-fader signal of the stereo output channel can be recorded directly to a sound clip. For
playback, the signal will be sent to the stereo output channel immediately before the stereo fader
(EQ and dynamics cannot be applied to sound clip playback).
● Signal flow when using a sound clip
Recording a sound clip
Metronome
Sound
clip
Stereo
output
channel
Input
channels
Stereo bus
[MIC/LINE INPUT]
jacks
Mixer section