Yamaha AW2400 - Manual (Page 97)

97
AW2400 Owner’s Manual
Meters
10
Chapter 10
Meters
This section describes how the level meters can be shown on the display
screen, and how they can be used to the check levels of various signals
through the system.
Four display pages accessible via the METER screen are used to access the various level meter
displays. Press the [METER] key to call the METER screen, and then either press the [METER]
key as many times as necessary until the desired page appears, or press the function key ([F1]–
[F4]) corresponding to the desired page.
The contents of the various METER displays are as fol-
lows:
■ METER screen Input/RTN page ([F1] key)
■ METER screen Track page ([F2] key)
● Input/RTN Page
Displays the input and fader levels for input channels 1–
16 as well as effect return channels 1–4.
● Track Page
Displays the input and fader levels for track channels 1–
24.
The following items are displayed:
1 Input channel 1–16 input levels
B
Effect return channel 1–4 input levels
C Track channel 1–24 input levels
The level meters display the input levels for the corre-
sponding channels, while the numbers below the level
meters show the fader levels in dB.
D PRE EQ button
Pre-EQ levels (levels prior to the EQ stage) are displayed
when this button is on.
E PRE FADER button
Pre-fader levels (levels prior to the faders) are displayed
when this button is on.
F POST FADER button
Post-fader levels (levels after the faders) are displayed
when this button is on.
Level Meter Types
B
D E F G
A
C
D E F G